The Combination Laminate Punch is a self-contained hydraulic unit designed
to punch a 4-opposed slot and edge location combination format into 0.1mm to 0.8mm
thick FR4, and up to 1.6mm and 3.2mm with different die clearances.
The machine punches the combination by means of a unique sliding beam that
moves backwards and forwards to the desired position for each particular panel
size. The sliding beam carries the punch and die assembly for edge location, plus
the offset hole part of the 4-opposed slot configuration.
The three other slot punches for the 4-opposed slot configurations are carried
in 'C' frame units that also move backwards and forwards to the desired position
for each particular size.
Back and side stops are also fitted to aid repeatability of punching.
Panel Size: 300 x 300 to 600 x 600mm
Adjustable in 50mm increments, ie 350x350
Slot Size: 6 x 4mm 4off
Punch Position Accuracy: 0.025mm to datum
Power requirements: 220-240V 13A 50Hz (110V version available)